纤维复合材料界面横向拉伸分析

以单纤维十字型横向拉伸试验为研究对象,对纤维/基体界面采用弹性-软化双线性内聚力模型,建立了纤维复合材料在横向拉伸作用下界面法向失效过程的解析模型。得到了沿纤维/基体圆周界面的法向应力分布,纤维/基体界面的状态与界面承载力和单纤维复合材料承载力的关系,以及内聚力参数和试件几何尺寸对它们的影响。结果表明:纤维/基体圆周界面在脱粘前经历全部弹性及弹性+软化两种状态;当界面为弹性状态时,界面法向应力随界面强度线性增加;当界面为弹性+软化状态时,界面软化范围随界面裂纹萌生位移的增加而增大;界面初始脱粘位置与拉伸荷载方向重合;界面初始脱粘时的界面承载力随界面强度及界面裂纹萌生位移的增加而增加,随界面裂纹生成位移的增加而降低;单纤维复合材料的脱粘荷载受基体截面尺寸的影响,当纤维体积含量相同时,沿荷载方向截面尺寸的增大对提高脱粘荷载更显著。     

Asymptotic convergence of solutions for Laplace reaction–diffusion equations

We study the initial–boundary value problem for a Laplace reaction–diffusion equation. After constructing local solutions by using the theory of abstract degenerate evolution equations of parabolic type, we show asymptotic convergence of bounded global solutions if they exist under the assumption that the reaction function is analytic in neighborhoods of their $\omega$-limit sets. Reduction of degenerate evolution equation to multivalued evolution equation enables us to use the theory of the infinite-dimensional Łojasiewicz–Simon gradient inequality.     

ZnS Nanospheres for Optical Modulator in an Erbium-Doped Fiber Laser

Zinc sulfide (ZnS), which belongs to transition metal monochalcogenides, is a semiconductor material with wide direct band gap. It can potentially show some special applications (such as luminescence, phosphor, sensors, infrared window materials, photocatalysis) by changing the morphology, size, and crystal structure of semiconductor materials. However, ZnS nanospheres have not been studied as optical modulators until now. Herein, ZnS nanospheres are synthesized by the hydrothermal method and are used to realize optical modulators in an Er-doped fiber laser. The evanescent field effect is utilized to incorporate the ZnS nanospheres on a tapered fiber. Furthermore, with the increase in pump power, the modulation interval gradually decreases to a minimum of 34.36 ns corresponding to the modulation frequency of 29.1 MHz, which is the highest modulation frequency to our knowledge in a ring cavity all-fiber laser. These results demonstrate ZnS nanospheres together with the interaction of dispersion and nonlinearity in optical fibers can modulate the proposed lasers. This not only provides a new method for controlling the power and frequency of all optical modulators, but also marks an important step for ZnS materials in optics research and device applications.     

Two-dimensional magneto-thermoelastic interactions in a micropolar functionally graded solid

Abstract

The present work is concerned with the 2D deformation in a nonhomogeneous, isotropic, micropolar, magneto-thermoelastic medium in the context of Lord-Shulman theory as a result of an inclined load. The inclined load is supposed to be a linear combination of normal load and tangential load. Material properties are assumed to be graded in x-direction. Normal mode technique is proposed to obtain the analytical expressions for the temperature field, displacement components, and stresses. These are also calculated numerically and depicted graphically to observe the variations of the considered physical variables.

Communicated by Seonho Cho.     

螺栓松动边界下纤维增强复合薄板的振动测试方法

提出了基于预埋压力传感器的量化测试方法,研究了螺栓松动边界对纤维增强复合薄板振动特性的影响。首先,自主设计并开发了带有预埋压力传感器的螺栓松动边界下复合薄板的振动测试系统,并详细介绍了系统各个部件的组成和功能;然后,归纳出一套合理、规范的松动边界下复合薄板的振动测试流程,并对HF10碳纤维/树脂复合薄板进行了实际测试。结果表明:随着螺栓松动程度的不断增加,复合薄板的固有频率逐渐降低,模态振型的节线位置也发生了不同程度的变化,但其阻尼结果呈现先增大后减小的趋势;而共振和非共振响应呈现先减小后增大的趋势。     

波形钢板-UHPC组合桥面板结构截面优化

对实腹式波形顶板-UHPC(超高性能混凝土)组合桥面板进行了改进, 采用空腹式结构建立波形钢板-UHPC组合桥面板有限元模型, 研究UHPC层厚度、波形钢板厚度、波形长度、下缘板宽度和波形高度等截面参数变化对组合桥面板受力特性的影响, 并确定其合理取值范围. 在此基础上, 通过理想点法对参数组合进行优化, 得到合理的参数匹配. 研究结果表明 相较于实腹式组合桥面板, 优化后的组合桥面板自重减小35%, 钢板弯折处应力减小16%; 相较于正交异性钢桥面板, 桥面板用钢量减小7%, 顶板与U肋连接位置应力减小47%.     

An Improved Composite Multiscale Fuzzy Entropy for Feature Extraction of MI-EEG

Motor Imagery Electroencephalography (MI-EEG) has shown good prospects in neurorehabilitation, and the entropy-based nonlinear dynamic methods have been successfully applied to feature extraction of MI-EEG. Especially based on Multiscale Fuzzy Entropy (MFE), the fuzzy entropies of the τ coarse-grained sequences in τ scale are calculated and averaged to develop the Composite MFE (CMFE) with more feature information. However, the coarse-grained process fails to match the nonstationary characteristic of MI-EEG by a mean filtering algorithm. In this paper, CMFE is improved by assigning the different weight factors to the different sample points in the coarse-grained process, i.e., using the weighted mean filters instead of the original mean filters, which is conductive to signal filtering and feature extraction, and the resulting personalized Weighted CMFE (WCMFE) is more suitable to represent the nonstationary MI-EEG for different subjects. All the WCMFEs of multi-channel MI-EEG are fused in serial to construct the feature vector, which is evaluated by a back-propagation neural network. Based on a public dataset, extensive experiments are conducted, yielding a relatively higher classification accuracy by WCMFE, and the statistical significance is examined by two-sample t-test. The results suggest that WCMFE is superior to the other entropy-based and traditional feature extraction methods.     

福建登陆北上台风对杭州影响的对比分析

利用自动站观测资料、探空资料和全球预测系统（global forecast system，GFS）分析资料，结合统计分析、合成分析、对比分析以及物理量诊断等方法，对5个福建登陆北上并严重影响杭州的台风进行了分析，结果表明：（1）福建登陆北上影响杭州的5个台风可以分为两类，一类是福建登陆北上越过30°N（北上台风），另一类是刚进入浙南就减弱为低压（1010号莫兰蒂台风）。北上台风对杭州造成了大风和暴雨双重影响，而1010号莫兰蒂台风主要带来的是暴雨。（2）在北上台风对杭州产生较大影响时，其合成台风中心位于福建中部地区，东南风低空急流和偏南风低空急流显著，杭州处于台风环流第一象限两支急流的交汇处，利于产生暴雨、大风；而在1010号莫兰蒂台风对杭州产生较大影响时已减弱为热带低压环流，其北部倒槽与西风带冷空气相结合是产生特大暴雨的主要原因，低压环流与副高之间的偏南风急流也有利于暴雨形成。（3）两类台风虽然部分指数和空间热动力结构相近，但北上台风的水汽条件和动力条件更好，而1010号莫兰蒂台风在冷空气切入和斜压性增强作用下，具备更高的对流有效位能，出现对流性强降水的可能性更大。     

复合材料失效判据有效性验证方法研究

为系统地验证复合材料失效判据计算精度和有效性范围,给出了4种材料体系、6种铺层形式的层合板在单轴、双轴载荷下的失效试验数据,用以评估复合材料失效判据在单向层合板失效包线、多向层合板初始失效包线、多向层合板最终失效包线、层合板变形及层合板的破坏特性等五个方面的预测能力。并根据验证方法和有效性评估策略对失效判据计算精度进行量化考核,给出了失效判据在五个层面上的计算精度。